A300 Outlander Synthetic Mallard
The key to superior performance in semiautomatic shotguns is simplicity.
In keeping with the Beretta tradition, the new A300 Outlander is a soft-shooting gas-operated system semi-auto which combines the reliable Beretta bolt with falling block (locked breech) with an improved gas valve with a self-cleaning cylinder and piston, so that excess pressure caused by the most powerful cartridges can be decreased automatically.
Now with a mallard green anodized receiver. Only available at Cabela’s.
REDUCED NUMBER OF COMPONENTS
GAS-OPERATED SYSTEM WITH EXHAUST VALVE
ASSEMBLY WARNING: In order to prevent damage to the elastic piston seal, first insert the piston into the chamber cylinder and then insert the magazine tube cap shaft through the piston hole. The valve unit is connected to the barrel, making assembly and disassembly of the barrel itself easier.
MOBILCHOKE® BARREL/MOBILCHOKE TUBES
DROP AND CAST SPACERS
MAGAZINE CAPACITY: The magazine has a two-shot capacity, in line with current hunting regulations in many countries, made possible by the insertion of a reducer. This reducer restricts firearm use to no more than three shots (two in the magazine, and one in the cartridge chamber). This device is fitted by Beretta during manufacture and assembly of the A300 Outlander. In certain specific areas, hunting is only authorized with firearms of not more than two rounds. To use the A300 Outlander in these regions, the magazine capacity must be limited to a single shot with a reducer plug (operation to be performed by a competent gunsmith). NOTE! WITH REDUCER REMOVED, CAPACITY IS 3 SHELLS IN THE MAGAZINE WITH THE USE OF 2.75” SHELLS ONLY! WITH 3” SHELLS, IT WILL ONLY ACCOMMODATE 2 SHELLS IN THE MAGAZINE!